The Main steps to assembling the fuselage assemble spar box and rear bulkhead attach motor mount add fiberglass mount motor route motor wire Insert and align boom/tail assembly custom fit your gear at this point Fit and glue fuselage halves together assemble spar boxand rear bulkhead 1. measure 1/2 inch inboard from the end of 6.top spar […]
Tag: manual
Parts identification
1. Rear brace 20. Quick nuts 2. Motor mount 21. Wood screws #6 3. Rear bulkhead 22. Brass tubes 4. Forward bulkhead 23. Nylon […]
Wing assembly
The main steps to building the wings (pictures coming soon) drill servo arms to fit push rods Fit and mount servos adjust servo arms for neutral point Fit spar cap Glue in spar cap attach spar capture tube install control linkages drill servo arms to fit push rods use a #50 or 5/64″ drill so the […]
Construction Manual
This is the Construction manual for the techpod. Part identification I will take you through all the steps for making your techpod kit into a high performance flying machine. The Techpod can be broken into a few major parts. Wings Fuselage Tail Camera pan/tilt Custom gear installation Nick Weber has been kind enough to make a […]