I wanted to share some test flight video.
It was equipped with a 5000 mah 3 cell lipo. a 1100 kv 350 watt motor spinning a 9*7 prop. I did a 20 minute flight and burned 1007 ma.
As you can see from the video it is extremely stable while flying slow, even with a fairly large battery on board. I could have easily flown for an hour and a half with that battery.
Continue reading “Techwing low and slow”hey everyone, So, I have been working on a few upgrade modifications that will be available in about a week. removable tail working belly/camera bay doors Plug and play, tool-less wings. No more dealing with pluging in servo wires and hunting for a screw driver. there will mating […]
Hey guys, I wanted to share my thoughts about the open source FEA/CFD package, openFoam. I have been using it as part of the free linux distribution, CAElinux 2013. I have been playing around with some of the tutorials for the past few weeks. Very interesting and cool. After familiarizing myself with the file […]
Hey Guys, I’m Kabir, a friend of Wayne’s. I’m 15 and am form Kolkata,India. I would like to showcase my latest project here 😉 The Copter : The copter is a large one of my own design made from lightweight CF rods, equipped with a brushless gimbal. I am using very efficient low-kV pancake motors […]
Hey everyone! have not found a place where the fixed-wing control for the PX4 is being done so I started this blog. This is a Screen shot from XFLR5. I use it to mathematically model the physical form of an airplane. I can then take this description of said plane and then start modeling the […]
Techpod UAV Kit Cruise Speed: 32knots Climb Rate – 2000 ft/min Wingspan = 105 in Wing area = 605 sq in Wing loading = 1.191 lbs per sq ft @ 5 lbs Fuselage Length = 45 in Dry weight = 2.75 lbs* loaded weight =5.0lbs (2.25 lbs of battery/payload) EPO Wings, Tail and […]
Hobbyuav 